Built-in amplifier LF/HF: 600/300 W RMS
Built-in amplifier peak LF/HF: 1200/600 W
Frequency response: 68Hz - 20KHz -6dB
Low frequency woofer: 2 x 165 bobina 44 neodimio inch
High frequency driver: 1 x 36 bobina 64 neodimio inch
Maximum SPL cont/peak: 125/134 dB
Dispersion: 100°x10° max dipendente dal n° degli elementi H x V
Input impedance: 22 Kohm
Crossover frequency: 1.2 KHz
Ac power requirements: 640 VA
Input connector: XLR con loop
Power cord: 5 mm/inch
Net Dimension (WxHxD): 574x220x383 mm/inch
Net weight: 14 kg/lb
Transport Dimension (WxHxD): 655x455x280 mm/inch
Transport weight: 15.7 kg/lbs
Compact 2-way, bi-amplified bass-reflex design
2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil
1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil
Frequency response from 68Hz to 20KHz
Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
High impact polypropylene gas-injected enclosure with integrated rigging hardware adjustable with 0° to 10° angle between cabinets at 2° step
Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage to multiple cabinet full sized line array, the MITUS 206LA maybe used also in outdoor applications where the system is not directly exposed to the elements
Wide range of hardware accessories for flying and ground stacked configurations
Very lightweight, only 14Kg