System:
Frequency Response:
75 Hz – 18 kHz ±3 dB
68 Hz – 20 kHz -10 dB
Nominal Dispersion: 60° H x 40° V @ -6 dB points, rotatable
Maximum SPL: 125 dB peak
Crossover type: Active
Transducers: 1x 12" (311.5mm) LF driver; 1x 1" (25.4mm) HF compression driver
Limiter Independent HF, LF, peak and rms
Amplifier:
Maximum output power: 1,100 W, independent of limiters and driver protection circuits.
Type: Class-D
Protection: Short circuit, thermal
Connectors:
Input / Link 1x combo jack/XLR, 1x XLR
Sensitivity: +1 dBu
Input impedance: 40 kΩ, balanced
Maximum input level: +12.5 dBu
ULTRANET input/link: 2x RJ45
Mains Supply: Standard IEC receptacle
Controls: DSP: Rotary push-encoder and level control; Buttons for Process, Setup, Exit, Enter
User DSP Functions:
Factory EQ presets Positioning, Sound mode, FBQ
Display LCD 128 x 32, blue , backlit
Delay 0 - 300 ms
Equalization High and low shelving EQ, 2 x parametric EQ
Limiter Zero attack input limiter
Presets 20 total presets, 19 user-definable
Crossover High pass L-R 24 dB/oct
Protection Lock-out function for all settings
ULTRANET Digital Network:
Digital processing; Factory EQ presets: 24-bit, 44.1 / 48 kHz sample rate
System: Signal 16 channels; Latency < 0.9 ms
Cabling: Cables Shielded CAT5; Cable length max. 246ft / 75m recommended
Power Supply:
Power consumption: 140 W @ 1⁄8 max power
Voltage (fuses): USA / Canada 120 V~, 60 Hz (T 8 A H 250 V); UK / Australia / Europe 220-240 V~, 50/60 Hz (T 4 A H 250 V); Korea / China 220-240 V~, 50/60 Hz (T 4 A H 250 V); Japan 100 V~, 50/60 Hz (T 8 A H 250 V)
Enclosure:
Dimensions (H x W x D): 11.9" x 17.8" x 19.9" (302 x 452 x 504mm)
Net weight: 37.2 lbs. (16.9 kg)
Construction: 5⁄8" (15mm) birch plywood + polypropylene plastic
Finish: Semi-matt black paint
Grille: Powder-coated, perforated steel
Flying hardware: N/A