System:
Frequency Response:
40 Hz – 150 Hz ±3 dB
33 Hz – 150 Hz -10 dB
Nominal Dispersion: Half Space:
Maximum sound pressure level (SPL): 136 dB peak
Crossover type: Active
Transducers: 1x 18" (460mm) LF driver
Limiter: Peak and rms
Amplifier:
Maximum Output Power: 3000 W, independent of limiters and driver protection circuits
Type: Class-D
Protection: Short circuit, thermal
Connectors:
Input/link: 1x Combo Jack/XLR; 1x XLR
Sensitivity +4 dBu or +14 dBu, software-switchable
Input impedance: 40 kΩ balanced
Maximum input level: +22 dBu
Ultranet input/link 2x RJ45
Mains Supply: Neutrik powerCON® 20A
Controls:
DSP: Rotary push-encoder and level control; Buttons for Process, Setup, Exit, Enter
User DSP Functions: Factory EQ Presets: Positioning, Sound mode
Display LCD: 128 x 32, blue, backlit
Delay: 0 - 300 ms
Equalization: High and low shelving EQ; 2x parametric EQ
Limiter: Zero attack input limiter
Presets: 20 total presets, 19 user-definable
Crossover: Low-Pass L-R 24 dB/oct
Protection: Lock-out function for all settings
Ultranet Digital Network
Digital processing: A/D conversion: 24-bit, 44.1/48 kHz sample rate; Converter type: 24-bit, delta-sigma
System: Signal 16 channels; Latency < 0.9 ms; Frequency response: 20 Hz to 20 kHz (+0 / -3 dB); Dynamic range: typical 92 dB
Cabling: Cables: Shielded CAT5; Cable length max. 246ft (75m), recommended
Power Supply:
`Power consumption: 180 W @ 1⁄8 max power
Voltage (fuses): USA / Canada 120 V~, 60 Hz (T 15 A H 250 V)
Enclosure:
Dimensions (H x W x D): 30.4" x 22.8" x 27.6" (773 x 579 x 700mm)
Net weight: 127.5 lbs. (57.9 kg)
Construction: ¾" (18mm) birch plywood
Finish: Semi-matte black paint
Grille: Powder coated, perforated-steel
Flying hardware: M10 x 16 points