Configuration: 2 way
Built-in amplifier LF/HF: 600/300 W RMS
Built-in amplifier peak LF/HF: 1200/600 W
Frequency response: 60Hz - 20KHz -6dB
Low Frequency woofer: 2x10 - 2.5 coil neodymium inch
High Frequency driver: 1x1.4 - 2.5 coil neodymium-coax inch
Maximum SPL cont/peak: 127/134 dB
Dispersion: 70°conical HxV
Input impedance: 22 Kohm
Crossover Frequency: 1.2 KHz
AC Power requirements: 640 VA
Input connector: XLR with loop
Power cord: 5/16.4 m/ft
Net Dimension (WxHxD): 547x290x402 - 22.6x11.4x15.8 mm/inch
Net Weight: 19/41.9 kg/lb
Transport Dimension (WxHxD): 890x390x510 - 35x15.4x20.1 mm/inch
Transport Weight: 21.1 / 46.5 kg/lbs
2-way bi-amplified, bass-reflex design with coaxial driver
2 x 250 mm (2 x 10’’) B&C custom neodymium magnet speakers with 64 mm (2.5’’) voice coil, one of them is coaxial with 36 mm (1.4’’) exit titanium compression driver and 64 mm (2.5’’) voice coil
Frequency response from 60Hz to 20KHz
Class D built-in amplifiers, 600WRMS to the LF and 300WRMS to the HF with switch mode power supply
DSP with 8 eq presets
Control panel with XLR input and link, volume, presets, HP-filter, ground-lift
70° conical dispersion
15 mm (5/8”) birch plywood enclosure, scratch resistant black paint finish
35 mm (1.38’’) stand socket and back side carrying handle
Ideal for live sound stage monitoring applications, as well as a front of house main PA speaker
Very lightweight, only 19Kg