Configuration: 2 way Built-in amplifier LF/HF: 700/200 W RMS Built-in amplifier peak LF/HF: 1400/400 W Frequency response: 70Hz - 20KHz -6dB Low Frequency woofer: 2x6.5 - 1.5 coil inch High Frequency driver: 1 - 1.4 coil inch Maximum SPL cont/peak: 124/131 dB Dispersion: 70° x 50°...
Configuration: 2 way
Built-in amplifier LF/HF: 700/200 W RMS
Built-in amplifier peak LF/HF: 1400/400 W
Frequency response: 70Hz - 20KHz -6dB
Low Frequency woofer: 2x6.5 - 1.5 coil inch
High Frequency driver: 1 - 1.4 coil inch
Maximum SPL cont/peak: 124/131 dB
Dispersion: 70° x 50° rotatable HxV
Input impedance: 640 Kohm
AC Power requirements: 640 VA
Input connector: XLR with loop, RCA ST
Power cord: 5/16.4 m/ft
Net Dimension (WxHxD): 190x560x260 / 7.48x22.04x10.23 mm/inch
Net Weight: 12.3/27.11 Kg/lb
Transport Dimension (WxHxD): 290x660x360 / 11.41x25.98x14.17 mm/inch
Transport Weight: 14.3/31.52 Kg/lbs
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
2x165mm (6.5”) LF woofer with 38mm (1.5”) voice coil, custom made for FBT
25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
Frequency response from 70Hz to 20 kHz
70°H x 50°V Constant Directivity Rotatable Horn
6 x M10 suspension points, wall bracket mount thread, 35mm (1 3/8”) top-hat
One integrated handle
12mm (0.47”) birch plywood scratch resistant enclosure and internal bracing